Guide

How to Position Brushes on a KitchenAid Mixer

Updated on · By the Cooking Old Skool team

The brush’s angled face must match the angle inside its holder, and its metal contact must face the motor commutator. Unplug the mixer before checking, and follow the service instructions for your exact model.

On this page (7 sections)
  1. Which way should motor brushes face in a KitchenAid mixer?
  2. How can you check the brush position safely?
  3. What if the brush does not slide into place?
  4. How can you tell whether the brushes need attention?
  5. How do you choose replacement parts?
  6. Do these products help with brush positioning?
  7. What should you do if the correct position is still unclear?

The correct position for KitchenAid mixer motor brushes is with each brush’s angled face aligned to its holder and its contact surface touching the commutator. Unplug the mixer first, and check the model-specific service instructions before removing or reinstalling a brush.

Brushes carry electrical current to the motor’s rotating commutator. Their position matters because a brush that sits crooked, backward, or loosely in its holder may not make proper contact.

Which way should motor brushes face in a KitchenAid mixer?

Match the brush’s angled face to the angle inside its holder. The brush’s contact end must meet the motor commutator, the segmented part that turns with the motor.

The holder guides the brush toward the commutator. Its angle is a useful clue, but don’t assume every KitchenAid mixer uses an identical brush or holder layout.

Check the service instructions for your exact model before removing a brush. If the brush has a marking, notch, or other orientation cue, follow the instructions for interpreting it rather than guessing.

How can you check the brush position safely?

Disconnect the mixer from power before inspecting the brushes. A switched-off mixer can still be unsafe to service while plugged in.

  1. Turn the speed control to off and unplug the mixer.
  2. Find the model number and consult the service instructions for that model.
  3. Remove a brush only as directed, keeping track of its original orientation.
  4. Check that the angled face aligns with the holder and the brush moves freely as designed.
  5. Reinstall it as instructed, without forcing it into place.

Keep screws and small parts together, and use the correct tool. Stop if the holder is cracked, the brush is chipped, or you can’t tell which way it belongs.

For the broader repair process, see how to repair a KitchenAid stand mixer. That guide can help you decide whether the problem calls for a brush inspection or a different repair.

What if the brush does not slide into place?

Don’t force a brush that catches or sits at an odd angle. It may be reversed, the wrong type, worn unevenly, or blocked by debris.

Remove it only if your model’s instructions say how. Look for visible damage, but don’t sand, bend, or reshape the brush to make it fit.

If the brush fits only when pressed hard, or the holder looks damaged, stop the repair. A technician can confirm the correct part and inspect the motor before further use.

How can you tell whether the brushes need attention?

Visible brush damage, poor fit, or heavy sparking can signal a problem, but those signs don’t identify the cause by themselves. Follow the model’s service guidance or get help from a qualified technician.

Don’t run the mixer with a brush removed or loosely installed. If the mixer has stopped, smells unusual, or sparks heavily, unplug it and leave it off until the fault is checked.

For context on sparking, read why a kitchen mixer motor sparks. A small amount of sparking may have different causes from heavy or persistent sparking, so use symptoms as a reason to inspect rather than as a diagnosis.

How do you choose replacement parts?

Use parts specified for your mixer’s model number. Similar-looking parts can differ in fit, and the wrong brush can fail to seat correctly.

Check KitchenAid stand mixer replacement parts for repair-related options. Compare part descriptions against your model’s service information before ordering.

A drive belt is a separate component from a motor brush. If the mixer’s issue seems related to the drive system, see replacement drive belts for stand mixers, then verify fit for your specific model.

Do these products help with brush positioning?

The products below are not motor brushes or tools for setting brush orientation. They may be relevant to other mixer or drive-belt needs, but they won’t confirm which way a KitchenAid motor brush belongs.

The BLACKHORSE-RACING belt is described for go-karts and specified Manco, American Sportworks, Ken-bar, and Comet TAV2 applications. It is not identified for KitchenAid mixers.

The SnnyNyx whisk is described for compatible KitchenAid 4.5 qt and 5 qt tilt-head mixers. Its fit and use are separate from motor maintenance.

The OUOLife whisk is described for KitchenAid 4.5 qt and 5 qt tilt-head models. It is a mixing attachment, not a motor repair part.

For bread mixing needs, compare KitchenAid stand mixers for bread. Choose a mixer based on the dough and batch size you make, not on motor brush orientation.

What should you do if the correct position is still unclear?

Use the service instructions for your exact model, or have a technician check the brush and holder. Don’t guess, force the brush, or power on the mixer to test an uncertain installation.

First confirm the model number, then compare the brush shape and holder angle with the manufacturer’s service guidance. If the parts don’t match or you see damage, stop and get help before using the mixer.

Frequently asked questions

Which way do KitchenAid mixer motor brushes go?

The brush’s angled face should match the angle inside its holder, and its contact surface should meet the motor commutator. Brush designs and holder details can vary by mixer model, so use the service instructions for your exact model.

Unplug the mixer before opening or inspecting any part.

Can I reverse a KitchenAid mixer brush?

Don't reverse a brush unless the service instructions for your model say to do so. A brush that has worn to fit one direction may not make proper contact when turned, and forcing it can damage the brush or holder.

If the orientation is unclear, stop and ask a qualified repair technician.

Should KitchenAid mixer brushes be replaced in pairs?

Replace motor brushes as a matched pair when the service instructions call for replacement, and use brushes specified for your mixer model. Uneven wear or damage can point to a larger motor issue.

Unplug the mixer and avoid running it with a missing, cracked, or incorrectly seated brush.