Best picks

6 Best Stand Mixer Cabinet Lifts (November 2026)

Updated on · By the Cooking Old Skool team

The best stand mixer cabinet lifts include the Rev-A-Shelf Heavy-Duty Stand Mixer Lift for Kitchen for heavy mixers, the Bxmgr Soft-Close Mixer Lift for Cabinet Appliance for wide cabinets, and the Tcomhk Mixer Lift for Cabinet-Appliance Lift-Heavy Duty for custom shelves.

On this page (5 sections)
  1. The best stand mixer cabinet lift for each kitchen
  2. How to choose a stand mixer lift for a cabinet
  3. How to install and use a stand mixer lift cabinet
  4. Stand mixer lift cabinet alternatives for small kitchens
  5. Which stand mixer cabinet lift should you choose?

The best stand mixer cabinet lift for most kitchens is the Rev-A-Shelf Heavy-Duty Stand Mixer Lift, because it supports up to 60 lb and combines soft close with adjustable tension. Bxmgr is another 60 lb option, while Tcomhk and Maclean suit lighter or more specialized cabinet setups.

A cabinet lift lets you store a heavy mixer below the counter and raise it when you need it. That frees counter space without lifting the mixer from a low shelf each time.

If you prefer a lighter option for dough, compare hand mixers with dough hooks.

Instead of keeping a stretch of counter clear all week, the mixer can sit out of sight until the bowl and beater are needed. That suits people who bake in bursts, especially when the worktop is shared with a toaster, coffee maker or food processor.

Before choosing hardware, measure the cabinet opening, depth and interior height. A lift that fits the mixer but not the cabinet can make installation difficult, especially where a drawer sits directly above the door.

Measure the clear opening rather than the outside width. Doors, face frames and hinges can reduce the space a shelf needs to pass through.

Depth matters too, since the mechanism needs room to travel without the mixer catching on the frame. A shallow cabinet may also leave the shelf unable to rise far enough to clear the counter edge.

If you are comparing storage accessories more broadly, our guide to baking scales covers another way to organize a baking station. You can also compare a lift with fixed surfaces in our guide to the best stand mixer table.

Weight is the next check, and it should include anything that stays on the shelf with the mixer. Attachments beside the bowl add up quickly, and a lift near the top of its range has less margin for an uneven load.

A lower capacity lift can still suit a lighter mixer. Choosing within the stated limit usually gives steadier movement than pushing a mechanism to its edge.

Soft close helps the shelf return quietly instead of slamming into the cabinet. Adjustable tension lets the lift match a lighter or heavier appliance, so raising takes less effort and lowering stays controlled.

Those details matter most if you use the mixer often. If you bake only once in a while, the main benefit is hidden storage and a clear counter.

Keep the cabinet interior clean and check the mounting points from time to time. Flour and grease can build up around moving parts, and a quick wipe keeps the shelf gliding as intended.

Our picks at a glance

  1. 1 Rev-A-Shelf Heavy-Duty Stand Mixer Lift for Kitchen
  2. 2 Bxmgr Soft-Close Mixer Lift for Cabinet Appliance
  3. 3 Tcomhk Mixer Lift for Cabinet-Appliance Lift-Heavy Duty
  1. 4CABINETIZER® Cabinet Lift Model

    CABINETIZER® Cabinet Lift Model

    Best for contractor lifting
    Check it
  2. 5CABINETIZER® Cabinet Lift Model

    CABINETIZER® Cabinet Lift Model

    Best for solo cabinet work
    Check it
  3. 6Maclean Extendable Kitchen Lift 5-20 kg

    Maclean Extendable Kitchen Lift 5-20 kg

    Best for adjustable kitchen storage
    Check it

The best stand mixer cabinet lift for each kitchen

The best stand mixer cabinet lift depends on the cabinet opening, mixer weight and whether you need a permanent kitchen mechanism or a portable lifting tool. The first three picks are built around cabinet storage, while the CABINETIZER models serve a different lifting job.

Our score weighs specs, features and buyer feedback against what you're shopping for. We compared the stated capacities, cabinet dimensions, lift controls, included parts and daily storage needs.

ProductBest forCapacityCabinet fitDimensionsOur score
Rev-A-Shelf Heavy-Duty Stand Mixer Lift for Kitchenheavy mixersUp to 60 lb12–21 in opening, 24 in depth20.63 D x 12 W x 22.5 H in9.7
Bxmgr Soft-Close Mixer Lift for Cabinet Appliancewide cabinetsUp to 60 lb15.7–35.5 W x 21.6–25.5 D x 25.5–29.5 H in interior9.6
Tcomhk Mixer Lift for Cabinet-Appliance Lift-Heavy Dutycustom shelves42 lb24 in depth, 12–21 in opening9.2
CABINETIZER® Cabinet Lift Modelcontractor lifting300 lb9.0
CABINETIZER® Cabinet Lift Modelsolo cabinet work300 lb8.8
Maclean Extendable Kitchen Lift 5-20 kgadjustable kitchen storage5–20 kg820 x 168 x 106 mm8.5
1

Rev-A-Shelf Heavy-Duty Stand Mixer Lift for Kitchen: Best for heavy mixers

Rev-A-Shelf Heavy-Duty Stand Mixer Lift for Kitchen, stand mixer cabinet lifts
9.7/10Our score
  • Supports up to 60 lb
  • Soft-close dampeners
  • 3 adjustable tension settings
  • 12–21 in cabinet openings

A spring-assisted lift with soft close and 3 tension settings for heavy stand mixers in full-height base cabinets.

See it on Amazon

Pros

  • Highest stated capacity here
  • Soft close
  • Adjustable tension

Cons

  • Shelf is not included
  • Needs a full-height base cabinet

Rev-A-Shelf is the strongest all-around choice for a heavy stand mixer in a full-height base cabinet. Its 60 lb capacity gives it the highest stated capacity among the kitchen cabinet mechanisms here, and 3 adjustable tension settings let you tune the lift for the stored weight.

Gas-assisted arms raise the appliance into position, while soft-close dampeners guide the shelf back into the cabinet. The system fits base cabinets with 12–21 in openings and 24 in depth.

The lift measures 20.63 D x 12 W x 22.5 H in. It uses alloy steel with a powder-coated silver finish and includes the heavy-duty lift system plus mounting hardware.

One detail matters during planning: the RAS-ML-HDSC does not include a shelf. You need a suitable shelf or another compatible shelf system before storing the mixer.

Choose Rev-A-Shelf if you want the strongest kitchen-focused option with soft close and adjustable support. It is also a good fit when quiet, controlled movement matters more than a prebuilt shelf.

Rev-A-Shelf Heavy-Duty Stand Mixer Lift for KitchenCheck it on Amazon
2

Bxmgr Soft-Close Mixer Lift for Cabinet Appliance: Best for wide cabinets

Bxmgr Soft-Close Mixer Lift for Cabinet Appliance, stand mixer cabinet lifts
9.6/10Our score
  • Supports up to 60 lb
  • Soft close
  • Locking mechanism
  • 14.5 in or larger opening

The Bxmgr combines a 60 lb capacity with a soft-close mechanism and a wide stated cabinet range.

See it on Amazon

Pros

  • High capacity
  • Wide cabinet range
  • Locking mechanism

Cons

  • Not for a drawer directly above the cabinet
  • Cabinet measurements need careful checking

Bxmgr is the best stand mixer lift cabinet option for a wide range of cabinet interiors. It supports up to 60 lb, includes a locking mechanism and uses soft close with built-in vibration dampening.

Its stated interior fit is 15.7–35.5 in wide, 21.6–25.5 in deep and 25.5–29.5 in high. The product also requires an 18 in cabinet with a 14.5 in or larger opening, so measure the actual opening rather than relying only on the outside cabinet width.

An adjustable spring tension mechanism helps reduce the force needed to raise and lower the mixer. The hardware includes a mounting screw, and Bxmgr describes the lift for full-height cabinets.

This option is less forgiving when cabinet geometry is unusual. It is not intended for a cabinet with a drawer directly above it, so check the vertical layout before ordering.

Choose Bxmgr when your cabinet is wider or deeper than the common 12–21 in opening range. Its capacity matches Rev-A-Shelf, but the fit requirements are different.

Bxmgr Soft-Close Mixer Lift for Cabinet ApplianceCheck it on Amazon
3

Tcomhk Mixer Lift for Cabinet-Appliance Lift-Heavy Duty: Best for custom shelves

Tcomhk Mixer Lift for Cabinet-Appliance Lift-Heavy Duty, stand mixer cabinet lifts
9.2/10Our score
  • 42 lb capacity
  • Soft-close dampers
  • Adjustable spring tension
  • Mounting hardware included

Tcomhk is suited to buyers who want to add their own shelf and need a 42 lb lift for a bulky stand mixer.

See it on Amazon

Pros

  • Custom shelf option
  • Soft close
  • Adjustable spring tension

Cons

  • Shelf is not included
  • Lower capacity than the 60 lb lifts

Tcomhk suits a cabinet where you want to choose and install your own shelf. The lift supports up to 42 lb, attaches to cabinet side walls and includes the lift system with mounting hardware.

It fits most full-height cabinets with 24 in depth and a 12–21 in frame opening. The mechanism uses adjustable spring tension and soft-close dampers to guide the shelf back into the cabinet.

The shelf is not included. That gives you control over the shelf size and surface, but it also means you must plan the shelf around the mixer footprint, cabinet opening and mounting position.

The stated dimensions are 20.5 in deep, 23.9375 in high and 11.5–24 in wide. The product is made from iron and has a silver finish.

Choose Tcomhk for a custom shelf setup with a lower capacity than the 60 lb options. Check your mixer weight before choosing it, especially if the shelf will hold attachments or another appliance.

Tcomhk Mixer Lift for Cabinet-Appliance Lift-Heavy DutyCheck it on Amazon
4

CABINETIZER® Cabinet Lift Model: Best for contractor lifting

CABINETIZER® Cabinet Lift Model, stand mixer cabinet lifts
9.0/10Our score
  • 300 lb load capacity
  • 9–72 in lift range
  • Brake winch
  • 12 x 14 in wooden platform

This steel cabinet jack is a jobsite lifting tool rather than a built-in kitchen cabinet mechanism.

See it on Amazon

Pros

  • Very high capacity
  • Wide lift range
  • Brake winch

Cons

  • 100 lb tool weight
  • Not a normal base-cabinet mixer lift

CABINETIZER Model 72 is best for cabinet installation and other heavy lifting, not for leaving a stand mixer inside a base cabinet. Its 300 lb load capacity and 9–72 in lift range are far beyond the needs of a normal mixer shelf.

The steel unit uses a brake winch with a nylon strap and brake casters. A 12 x 14 in wooden platform supports loads, while the carpeted counter base and rubber grip dolly help protect work surfaces.

The included components are the frame, winch, casters, dolly base and collar. It weighs 100 lb, so this is a substantial tool for a workshop, renovation or jobsite.

The model can lift cabinets, televisions and other heavy materials. Its size and rolling base make it unsuitable as a hidden stand mixer lift for everyday kitchen storage.

Choose Model 72 if your real need is controlled lifting during cabinet work. For a mixer stored inside a kitchen cabinet, choose one of the dedicated mechanisms above.

CABINETIZER® Cabinet Lift ModelCheck it on Amazon
5

CABINETIZER® Cabinet Lift Model: Best for solo cabinet work

CABINETIZER® Cabinet Lift Model, stand mixer cabinet lifts
8.8/10Our score
  • 300 lb load capacity
  • 8.5–72 in lift range
  • Countertop and floor lift bases
  • Made in the USA

Model 76 is a large all-steel lift for cabinet installation, moving materials and other heavy positioning work.

See it on Amazon

Pros

  • Countertop and floor lift bases
  • 300 lb capacity
  • Converts to a dolly

Cons

  • 85 lb tool weight
  • Not designed as a stored mixer shelf

CABINETIZER Model 76 is the better CABINETIZER choice when you need floor and countertop lifting options. It supports 300 lb, lifts from 8.5–72 in and includes both base arrangements for different cabinet installation situations.

The all-steel unit weighs 85 lb. It can convert from a dolly base lift to a countertop lift, and the included parts are the base, frame, collar assembly and casters.

Its brake winch stops and holds the load when you release the handle. Optional accessories can extend the reach to 8 ft or add a drill-driven height adjustment, but those accessories are not part of the basic unit.

Model 76 can move cabinets between rooms and roll through standard doorways. That makes it useful for solo cabinet work, but its 85 lb frame is not a practical replacement for a compact mixer lift.

Choose it for renovation and installation work where you need to position heavy cabinets safely. Choose a kitchen lift if the goal is to raise one mixer from a permanent cabinet shelf.

CABINETIZER® Cabinet Lift ModelCheck it on Amazon
6

Maclean Extendable Kitchen Lift 5-20 kg: Best for adjustable kitchen storage

Maclean Extendable Kitchen Lift 5-20 kg, stand mixer cabinet lifts
8.5/10Our score
  • 5–20 kg load range
  • 6-level spring tension adjustment
  • 820 x 168 x 106 mm
  • Mounting accessories and instructions

Maclean is a compact built-in kitchen lift for mixers and other appliances, with 6 resistance settings for different loads.

See it on Amazon

Pros

  • 6 tension levels
  • Includes mounting accessories
  • Supports up to 20 kg

Cons

  • Lower capacity than the 60 lb options
  • Cabinet fit needs checking

Maclean is the best stand mixer cabinet lift for buyers who want a compact kitchen shelf with several tension settings. The MC-497 supports 5–20 kg, which is about 11–44 lb, and has 6 spring resistance levels.

Its dimensions are 820 x 168 x 106 mm, with an alloy steel construction and silver finish. The lift is designed for mixers, food processors, microwaves and heavy cookware.

Mounting accessories and assembly instructions are included. The pull-out mechanism is intended to make stored appliances easier to reach, while the adjustable resistance matches the load more closely.

Maclean does not match the 60 lb capacity of Rev-A-Shelf or Bxmgr. It makes more sense for a mixer within its 5–20 kg range, especially when the extra tension settings matter more than maximum capacity.

Choose it after checking the cabinet width, depth and mounting surface. Its compact dimensions can help in a smaller kitchen, but the lift still needs enough clearance for the shelf and appliance to move safely.

Maclean Extendable Kitchen Lift 5-20 kgCheck it on Amazon

How to choose a stand mixer lift for a cabinet

Choose a stand mixer lift for a cabinet by matching the lift capacity to the mixer weight, then confirming the cabinet opening, depth and vertical clearance. A lift should move the appliance without forcing the shelf or cabinet sides to carry an unknown load.

Rev-A-Shelf and Bxmgr both support up to 60 lb. Tcomhk supports 42 lb, while Maclean supports 5–20 kg.

The capacity is not a suggestion to exceed the cabinet's own construction limits.

Soft close is useful when you want the shelf to return quietly and with controlled movement. Rev-A-Shelf, Bxmgr and Tcomhk include soft-close features, while Maclean describes controlled movement through its spring-adjustment system.

Adjustable tension is another important difference. Rev-A-Shelf has 3 settings, Tcomhk has adjustable spring tension, Bxmgr has an adjustable spring mechanism and Maclean offers 6 levels.

A shelf is not always included. Rev-A-Shelf's RAS-ML-HDSC and Tcomhk require separate shelf planning, so account for the shelf material, width and attachment before installing the lift.

For a different kind of stand mixer setup, read What Is a Bowl Lift Stand Mixer? before deciding where your mixer should live. If reaching down to a low shelf is difficult, our guide to the Best Stand Mixer For Seniors covers other access considerations.

How to install and use a stand mixer lift cabinet

Install a stand mixer lift cabinet only after checking the cabinet structure, opening and depth against the mechanism's stated fit. Follow the included assembly instructions, keep the lift aligned with the cabinet sides and test movement before placing the mixer on the shelf.

Measure twice before drilling. Check the door, hinges and any drawer above the cabinet so the raised shelf has a clear path.

Use the lowest practical tension setting that still raises the mixer in a controlled way. If the lift has several settings, adjust gradually rather than forcing the mechanism with the full appliance weight in place.

Keep the shelf surface stable and centered. Place the mixer so its weight is not concentrated at one edge, and lower it slowly until the soft-close system takes over.

Wipe away flour and grease from the shelf and moving areas. Do not add extra parts or exceed the stated capacity, and inspect mounting screws if the shelf begins to shift.

A mixer lift can also make nearby tools easier to organize. Keep a one handed rolling pin accessible for dough work, and store bread supplies near your best banneton proofing basket when the cabinet layout allows.

Stand mixer lift cabinet alternatives for small kitchens

A stand mixer lift cabinet is not the only way to reduce counter clutter. A dedicated table keeps the mixer ready to use, while a lift hides it between sessions.

Choose a table when you use the mixer often and have floor space. Choose a lift when counter space is limited and the cabinet can support the hardware.

A table leaves the mixer assembled at a comfortable height, which saves time for daily dough, batters or frostings. The trade-off is floor space, since the table stays in the room even when the mixer is not in use.

In a small kitchen, that footprint can crowd the walkway or leave little room for a stool or prep surface. A cabinet lift instead keeps the footprint inside an existing base cabinet.

That suits a kitchen where the opening fits the lift and the mixer weight sits within capacity. It also suits a worktop that needs to stay clear for chopping, cooling racks or serving dishes.

The trade-off is setup work. The cabinet needs measuring, the lift needs mounting, and the shelf may need to be supplied separately.

CABINETIZER Model 72 and Model 76 are alternatives only for a portable lifting tool. Their 300 lb capacity, casters and brake winches suit cabinet installation, not normal appliance storage.

They raise and hold heavy materials while you position them, rather than staying hidden inside a kitchen cabinet. That makes them useful for renovation work, moving cabinets or handling bulky workshop loads.

They are also far larger and heavier than a mixer lift, and they need open space to roll and lift safely. For a stand mixer, a dedicated kitchen mechanism is smaller, quieter and easier to match to a base cabinet.

Think about the rest of the baking station too. Best liquid measuring cups can stay in a shallow drawer, while the mixer and heavier attachments use the cabinet lift.

That split keeps light, frequently used tools close at hand without loading the lift with extra items. Attachments that belong with the mixer can be stored nearby in the same cabinet or an adjacent drawer.

Keeping the shelf load to the mixer and its bowl leaves more margin within capacity. It also keeps weight centered, which helps the shelf rise and settle without leaning.

If you want the larger category explained, read what commercial mixer stands are called. That helps you separate a countertop stand, a cabinet mechanism and a jobsite lift before you buy.

The names overlap, but the jobs are different. A countertop stand stays visible and ready, a cabinet mechanism hides the appliance between uses, and a jobsite lift moves heavy materials during installation work.

Matching the tool to the job avoids paying for capacity you do not need. For small kitchens, the best choice often keeps daily tools reachable and leaves the mixer hidden until baking starts.

Which stand mixer cabinet lift should you choose?

Choose the Rev-A-Shelf Heavy-Duty Stand Mixer Lift if you need a 60 lb kitchen lift with soft close, 3 tension settings and a 12 to 21 in cabinet opening. Choose Bxmgr for its wider interior range, Tcomhk for a custom shelf and Maclean for 6 spring-tension levels within a 5 to 20 kg load range.

Choose CABINETIZER Model 72 or 76 only when your project involves lifting cabinets or other heavy materials. For everyday mixer storage, the dedicated kitchen mechanisms are smaller, easier to match to a cabinet and better suited to repeated appliance access.

Measure the cabinet before ordering, confirm whether a shelf is included and keep the mixer within the stated capacity. Those checks matter more than choosing the largest lift in the group.

Start with the mixer weight, including the bowl and any attachments that will stay on the shelf. A 60 lb lift gives more headroom for a heavy stand mixer, while a lower capacity lift can work well for a lighter model.

Matching capacity to weight helps the lift move smoothly. Next, confirm the cabinet opening, depth and interior height against the stated fit for the lift you have in mind.

The clear opening is what the shelf must pass through, so measure inside the frame rather than relying on the outside cabinet width. Check for a drawer directly above the cabinet as well, since that can limit how far a shelf can rise.

Then check whether a shelf is included. Some lifts are sold as a mechanism only, so you may need to plan a shelf that fits the opening and suits the mixer footprint.

That extra step can be a benefit if you want a shelf surface that matches the kitchen. It does add cutting, mounting and alignment work, so factor that in before ordering.

Soft close gives a quieter, more controlled return into the cabinet. Adjustable tension lets you tune the lift for the stored weight instead of forcing one setting to handle every load.

More tension settings can help fine-tune the feel, especially when the mixer weight sits in the middle of the stated range. For a heavy mixer in a standard full-height base cabinet, the Rev-A-Shelf option is the most direct match.

For a wider or deeper interior, Bxmgr may fit better, provided the opening and vertical clearance check out. For a cabinet where you want your own shelf, Tcomhk gives that flexibility within a lower capacity.

For a lighter mixer and finer tension control, Maclean may suit the setup. Keep the shelf surface clean, the load centered and the hardware checked over time.

Those simple habits help the lift keep moving smoothly long after the first week of use.

Our top 3 picks at a glance

  1. 1 Rev-A-Shelf Heavy-Duty Stand Mixer Lift for Kitchen
  2. 2 Bxmgr Soft-Close Mixer Lift for Cabinet Appliance
  3. 3 Tcomhk Mixer Lift for Cabinet-Appliance Lift-Heavy Duty

Frequently asked questions

What is the best stand mixer cabinet lift?

The Rev-A-Shelf Heavy-Duty Stand Mixer Lift is the strongest match for most full-height base cabinets because it supports up to 60 lb, has soft-close dampers and offers 3 adjustable tension settings. Check the 12–21 in opening and 24 in depth before choosing it.

Can a stand mixer cabinet lift hold a heavy mixer?

Yes, but the capacity varies. Rev-A-Shelf and Bxmgr support up to 60 lb, Tcomhk supports up to 42 lb, and Maclean supports 5–20 kg.

Weigh the mixer and any items that will stay on the shelf, then leave room for stable movement.

Does a stand mixer lift cabinet include a shelf?

Not always. Tcomhk says its shelf is not included, and Rev-A-Shelf's RAS-ML-HDSC also does not include a shelf.

Plan a shelf that fits the cabinet opening and the lift arms, and confirm the mounting instructions before cutting material.

What cabinet measurements matter for a mixer lift?

Measure the cabinet opening, interior height, depth and the space above the cabinet door. Rev-A-Shelf needs a 12–21 in opening and 24 in depth, while Bxmgr gives a wider interior range.

Also check for a drawer directly above the cabinet.

Are CABINETIZER lifts good for stand mixers?

CABINETIZER lifts can raise much heavier loads than typical kitchen mixer mechanisms, but they are cabinet installation tools. Models 72 and 76 lift up to 300 lb, use a brake winch and move on casters, so they suit jobsite work rather than permanent base-cabinet storage.